Solved! How to Fix iPhone 13/X/8/7/6S/5 Won't Go Past Apple Logo?

There is a sad story: Your iPhone won't go past Apple logo to load into the Home screen. The issue may occur when you boot up your iPhone and the device appears to be stuck in the Apple logo with a white or black screen, or the Apple logo blinks on and off. It is also possible to see an Apple logo stuck on the screen for more than an hour when you are restoring the iPhone from a backup, transferring data from an older device, or upgrading iOS.

You may be worried that your iPhone is permanently broken. It did very frustratingly when your iPhone is stuck and stops working for hours, you can't get on Instagram or keep your friends in touch. However, this condition can be repaired and is not permanent. Here are some ways to get your iPhone to work properly again.

Part 1. Why Won't My iPhone Go Past the Apple Logo?

As soon as you turn on your iPhone, it installs its software and checks all the hardware to make sure it is working properly. All of this happens while the Apple logo appears on your iPhone. The Apple logo won't appear on your iPhone if something goes wrong along the way. There is still a possibility that it can be resolved.

Software Issues
A software-level issue could be causing an iPhone to display the Apple logo only and not move. An iPhone with a jailbroken iOS or a failed software update is almost always the cause of software issues.

Liquid Damage
Even a small droplet of water can cause damage to the internal hardware of an iPhone, creating that annoying Apple logo that just won't move.

Physical Damage
The internal hardware of your iPhone may have been damaged if you accidentally dropped it. It could affect your iPhone's ability to reboot, in return causing an Apple screen of death.

Replaced Hardware Components
A cracked or replaced display may cause the Apple logo screen to appear during startup, and the phone may take a long time to load.

Part 2. How to Fix iPhone 13/X/8/7/6S/5 Won't Go Past Apple Logo?

Way 1. Use the Powerful Repair Tool—TunesKit iOS System Recovery [Data Security]

As we mentioned before, iPhone won't turn on past the Apple logo may trigger by an iOS issue. In this situation, you’d better use the third-party program—TunesKit iOS System Recovery. It is an efficient way to solve software issues and fix bugs on your iPhone. After comparing it with other methods, it is the best option to get rid of all the annoyances you have with iOS issues. It perfectly handles 150+ possible iOS issues while protecting all of your data, such as iPhone stuck on the Apple logo, iPhone stuck on Do Not Disturb or even iPhone stuck in Zoom mode issue.

Moreover, it supports all iOS versions including the latest iOS 15 as well as the iPhone 13.

Characteristics of TunesKit iOS System Recovery:

• One-click to enter or exit Recovery mode
• Compatible with all iOS versions including the iOS 15
• It comes with a 100% success rate
• Will not cause any data loss after repairing
• Fix iPhone won't go past Apple logo within several steps

Try It Free 600,000+ Downloads

Try It Free 600,000+ Downloads

Let's start with downloading TunesKit iOS System Recovery. Under the guidance of the following steps, you do fix it easily.

Step 1Connect iPhone and launch the Program

Connect your device to the computer and open the program, and "Start" the repairing process.

Step 2Select Standard Mode

Select Standard Mode from the given two modes on the main screen to step forward. No need to worry about your data, this mode will not cause any data loss.

Step 3 Download Firmware

Confirm your iPhone info carefully and "Download" the latest firmware that TunesKit automatically detects for you.

Step 4 Fix iPhone Won't Get Past Apple Logo

After finishing the download, click the Repair button. Keep waiting until repair is completed.

Way 2. Hard Reset Your iPhone

It is sometimes enough to force your iPhone to restart to fix the iPhone won't get past the Apple logo. When your iPhone will not turn on past the Apple logo, a hard reset is necessary. Depending on the model of your iPhone, we've broken down how to hard reset it.

For iPhone 8/ 8 Plus, iPhone X, or later,
Start by pressing and releasing the Volume Up button. Press and release the Volume Down button. Then hold down the Side button. Keep holding the Side button until the Apple logo shows.

For iPhone 7 & iPhone 7 Plus
Press and hold down the Volume Down button and the power button at the same time. Keep holding both buttons until the Apple logo reappears.

For iPhone 6s, iPhone SE, & Earlier
Simultaneously press and hold the Home button and the Power button until the screen goes black and the Apple logo appears once again.

Way 3. Put Your iPhone in Recovery Mode

You can fix this issue by putting your iPhone into recovery mode and updating or restoring the device. We'll walk you through the steps.

Connect your device using a USB cable to the computer and then launch the latest version of iTunes. Next, let your device enter Recovery mode.

In iPhone 8, or newer,
Press and quickly let go of the Volume Up button, followed by the Volume Down button. Keep holding the Power button until the device enters the Recovery mode screen.

In iPhone 7 or iPhone 7 Plus,
Press both the Volume Down button and the Power button and keep holding both buttons until the device enters the Recovery mode screen.

In iPhone 6s or older,
Press both the Power button and the Home button until your phone enters the Recovery mode screen.

When you put your iPhone into Recovery mode, iTunes (or Finder) will prompt you with the message "There is a problem with the iPhone that requires it to be updated or restored". If the update option is selected, your computer will reinstall the latest version of iOS on your iPhone. However, all of the data on the device will be lost.

Way 4. Put Your iPhone in DFU Mode

During a Device Firmware Update (DFU), your iPhone's software and firmware are completely erased and reloaded. A user complains his iPhone 8 won't go past the Apple logo, and this way works for his phone. But ensure you have a recent backup of all your precious content on the iPhone before going forward. Because performing a restore is also the last step you can take to fully eliminate any software issues with your iPhone.

Step 1: Connect your iPhone to a computer, with iTunes ready. Follow the steps below to put your iPhone into DFU mode. They may vary depending on the model.

Step 2: In iPhone 8 or newer,
Press then quickly let go of the Volume Up button, followed by the Volume Down button, and press and hold the Power button until the screen goes black.
Then, hold the Power button and Volume Down button for 5 seconds. Let go of the Power button but keep holding the Volume Down button.

In iPhone 7/7 Plus,
Hold down the Power button and Volume Down button for 10 seconds.
Let go of the Power button but keep holding the Volume Down button until the screen goes black.

In iPhone 6s or older,
Hold down both the Power button and Home button for 8 seconds.
Release the Power button but keep holding the Home button.

Step 3: When you get a blank screen it means your phone is in DFU mode.

Part 3. Wrapping Up

In a few cases, iPhone won't go past Apple logo are small and easily fixed. However, you'll need to ask for professional tools for support when you suffer a more serious problem. We advise you to try each method one by one. It is worth mentioning that TunesKit iOS System Recovery is highly recommended for its powerful features and simple operation process.